Here you can find the driveline specifications for the Volvo FH range.

  • Engines
  • I-Shift
  • I-Shift software packages
  • Manual gearboxes
  • Rear axles
  • Rear axle ratios
  • Driveline combinations
  • Power take-offs

Engines

  D13A
Emmission standard  Euro 3
No. of cylinders  6
Displacement  12.8 dm³ 
Stroke  158 mm 
Bore  131 mm 
Compression ratio  18.1:1 
Economy revs  1050–1600 r/min 
Exhaust braking power 170 kW (2300 r/min)
VEB+ effect  375 kW (2300 r/min)
VEB+  option
Oil filters  2 full-flow, 1 bypass  
Oil change volume, incl. filter  33 l 
Cooling system, total volume  38 l 

Fuel prerequisites

ULSD quality (Ultra-low-sulphur diesel, max 350 ppm sulphur).

Oil change interval

Up to 100,000 km or once a year with VDS4. 

Engine-mounted power take-off

  Torque output  Ratio 
EPTT650  650 Nm*  1.26:1
EPTT1000  1000 Nm*  1.26:1
* Torque output both when driving and standing still.
D13A – Power/torque

D13A – Power/torque

Net output according to EC 582/2011

D13A400 (294 kW)   
Max power at 1400–1800 r/min  400 hp 
Max torque at 1050–1400 r/min  2000 Nm 
D13A440 (324 kW)   
Max power at 1400–1800 r/min  440 hp 
Max torque at 1050–1400 r/min  2200 Nm  
D13A480 (353 kW)   
Max power at 1400–1800 r/min  480 hp 
Max torque at 1050–1400 r/min  2400 Nm 
D13A520 (382 kW)   
Max power at 1500–1800 r/min  520 hp 
Max torque at 1050–1450 r/min  2500 Nm 
I-shift

12-speed splitter and range gearbox with an automated gear changing system. I-Shift can be fitted with a compact retarder, power take-off, emergency power steering pump and oil cooler.

Specifications

Type Top gear Engine torque (Nm) GCW approval (tonnes)
AT2412F
Direct  2400 44
AT2612F
Direct  2600 100
ATO2612F
Overdrive  2600 100
AT2812F
Direct  2800 60
ATO3112F
Overdrive  3150 100
ATO3512F Overdrive 3550 100

I-Shift software packages

Basic version (TP-BAS)
TP-BAS is the standard software package supplied with the I-Shift and includes the gearbox’s basic functions for allround driving.

I-Shift distribution gear changing software (TP-DIST)
TP-DIST adapts the gearbox’s function to the specific conditions in the distribution segment. The software package includes functions that aid manoeuvrability when starting off from standstill, in manoeuvring and when driving at low speed.

I-Shift construction gear changing software (TP-CON)
TP-CON adapts the gearbox’s function to the specific conditions in the construction segment. The software package includes functions that aid manoeuvrability when starting off from standstill, in manoeuvring and when driving at low speed. This software can also handle tougher road conditions.

I-Shift long haul gear changing software (TP-LONG)
TP-LONG includes intelligent functions that minimise fuel consumption. This software package is ideal for long-haul operations where strong emphasis is placed on fuel economy. This package includes the I-Roll function.

Heavy duty transport (TP-HD)
TP-HD optimises I-Shift for heavy duty transport with high gross combination weights (>85 tonnes). Regardless of the gross combination weight, the driver can always optimise drivability by selecting or deactivating the heavy duty mode, and activating the long haul mode. The functions in the software package also offer benefits for trucks hauling multiple trailers.

I-Shift software packages

Sales variants TP-BAS TP-DIST TP-CON TP-LONG TP-HD**
Basic PTO Functions (APF-BAS)
Enhanced PTO Functions (APF-ENH) o o o o o
Basic Gear Selection Adjustment (AMSO-BAS)
Enhanced Gear Selection Adjustment, incl. Kickdown (AMSO-AUT) o o o
Basic Vocational Functions (AVO-BAS)
Enhanced Performance – Bad Roads (AVO-ENH) o o o
Basic Shift Strategy
Performance Shift
Gearbox Oil Temperature Monitor
Heavy Start Engagement
I-Roll (•)
Smart Cruise Control (•)
Launch Control
Enhanced Shift Strategy (GCW ≤ 85 t)
Heavy Duty GCW Control (85 t < GCW ≤ 180 t)
Ultra low crawler gear* (ASO-ULC) o o o
Crawler gear* (ASO-C) o o o
Reverse multi-speed* (ARSO-MSR) o o o
I-See (PVT-BAS) use of GPS data o o
I-See (PVT-EXT) use of GPS data o o
• Standard (•) The function can be used when TP-LONG is activated. o Option – Not available
*Only AT2612F, ATO2612F, ATO3112F and ATO3512F. ARSO-MSR requires ASO-ULC or ASO-C.
**Only AT2612D, AT2612F, ATO2612F, ATO3112F and ATO3512F.

Manual gearboxes

14-speed splitter and range manual gearbox with two crawler gears and twelve synchronised forward gears, as well as four reverse gears. Patented synchromesh with servo function means low gear changing forces. The gearboxes can be fitted with a compact retarder, power take-off, emergency power steering pump and an oil cooler.

Manual gearbox specifications

Type Top gear Engine torque (Nm) GCW approval (tonnes)
VT2214B Direct 2200 100
VTO2214B Overdrive 2200 100
VT2514B Direct 2500 100
VTO2514B Overdrive 2500 100

Rear axles

Type  Axle Gear Max torque (Nm) Max axle/bogie load (tonnes) GCW approval (tonnes)
Single reduction          
RSS1344C/D Solo Hypoid 2600 13 44
RSS1356 Solo Hypoid 2400/2800 13 56/44
RSS1360 Solo Hypoid 3550 13 60
RTS2370A Tandem Hypoid 3550 23 70
           
Hub reduction          
RSH1370F Solo Conical spiral cut 3550 13 70
RTH2610F Tandem Conical spiral cut 3550 26 100
RTH3210F Tandem Conical spiral cut 3550 32 100
RTH3312 Tandem Conical spiral cut 3550 33 120

Rear axle ratios

RSS1344C/D RSS1356 RSS1360 RTS2370A RSH1370F RTH2610F RTH3210F RTH3312
2.31:1* 2.50:1 2.47:1 2.43:1 3.46:1 3.33:1 3.33:1 3.61:1
2.47:1* 2.79:1 2.64:1 2.57:1 3.61:1 3.46:1 3.46:1 3.76:1
2.64:1 3.10:1 2.85:1 2.83:1 3.76:1 3.61:1 3.61:1 4.12:1
2.85:1 3.44:1 3.08:1 3.09:1 4.12:1 3.76:1 3.76:1 4.55:1
3.08:1 3.67:1 3.40:1 3.40:1 4.55:1 3.97:1 3.97:1 5.41:1
3.36:1   3.67:1 3.78:1 5.41:1 4.12:1 4.12:1 7.21:1
3.70:1   4.11:1 4.13:1   4.55:1 4.55:1  
      4.50:1   5.41:1 5.41:1  
      5.14:1     7.21:1  
      5.67:1        
      6.17:1        
* For RSS1344D

Driveline combinations

  D13A400 D13A440 D13A480 D13A520
Manual gearbox        
VT2214B    
VTO2214B    
VT2514B  
VTO2514B  
VT2814B      
VTO2814B      
         
I-Shift        
AT2412F    
AT2612F
ATO2612F
AT2812F        
ATO3112F        
ATO3512F        
         
Single reduction axles        
RSS1344C/D
RSS1356
RSS1360
RTS2370A
         
Hub reduction axles        
RSH1370F
RTH2610F
RTH3210F
RTH3312

Power take-offs

A wide range of clutch-independent and clutch-dependent power take-offs are available - to drive all sorts of body equipment.

Clutch-independent power take-offs

PTER-DIN: Rear-mounted engine power take-off for direct drive of a hydraulic pump.
PTER1400: Rear-mounted engine power take-off with flange connection for hydraulic pump.
PTER-100: Rear-mounted engine power take-off with flange connection for hydraulic pump.

Clutch-dependent power take-offs

PTR-F: Connecting flange attachment and low-rev or high-rev.
PTR-FL/FH: Connecting flange attachment and low-rev or high-rev.
PTR-D/PTR-DM/PTR-DH: Low/medium/high-rev with DIN-connection for direct attachment of a hydraulic pump.
PTRD-F: High-rev with connecting flange attachment for direct-fitted propshaft.
PTRD-D: High-rev with dual drive. DIN connection front and rear for direct attachment of hydraulic pumps.
PTRD-D1: High-rev with dual drive. Connecting flange attachment at the rear and DIN attachment at the front.
PTRD-D2: High-rev with dual drive rear and single drive front. Two connecting flange attachments rear and one DIN attachment at the front.

Download

Driveline specifications

Download the complete driveline specifications as a PDF.

Download(PDF, 2.3 MB)
Find your local dealer

Get closer to the Volvo FH

Spec your perfect truck. It all happens with your local Volvo Trucks dealer.

Find your local dealer